back to products page

Two Component Pigmented Epoxy Binder for Vinyl Chips – PCE-255


Categories: , Brand:


PCE-255 by Paramount Coatings is a 2 component, high build, pigmented epoxy binder designed as a receiving coat for vinyl chips. This epoxy binder is self-priming, moisture tolerant, epoxy binder for dry or damp concrete. It can be applied directly to “saturated surface dry” (SSD) concrete slabs on grade (with no standing water). Additionally, it has a high pigment load designed to easily hide concrete in a single coat. It has amble working time for cut-ins, placement and also broadcasting vinyl chips. PCE-255 by Paramount Coatings meets all VOC regulations in North America.

  • Complies with USDA, FDA and also the Food Safety Modernization Act.
  • With the Correct Aggregate Meets Slip Resistance (ADA) for flat and incline surfaces.
  • Meets both LEED® and Green Seal® requirements.
  • VOC and EPA Compliant, and low odor during installation.
  • Cures to an inert finish.
  • Designed for both new floors and for resurfacing old floors
Common Uses
  • Automotive Show Room and Repair Floors
  • Commercial Bakeries and Kitchens Floors
  • Hospital and Health Care Facility Floors
  • Laboratories and Research Floors
  • Manufacturing and Warehouse Floors
  • Pharmaceutical Floors
  • Residential Interiors and Garage Floors
Coverage Rate Per Gallon
  • Self-Priming – 160 to 200 sq. ft. (14.9 to18.9 sq. m.)
  • Wet Film Thickness – 8 to 10 mils
  • Part A – 0.5 Gallons
  • Part B – 0.5 Gallons

Recommended for Use with Color Flakes by Paramount Coatings Co.


There are no reviews yet.

Be the first to review “Two Component Pigmented Epoxy Binder for Vinyl Chips – PCE-255”

related products