When you need a high performance zero VOC epoxy primer for use with your finished TRU Self Leveling flooring applications, use Rapid Set TXP Fast. This two-component, alkali resistant epoxy primer is specially formulated to have excellent substrate wetting capabilities to promote penetration and adhesion. TXP FAST is moisture tolerant and resistant to elevated pH levels. With TXP FAST, you can place the overlayment in as little as 6 hours.
Rapid Set TXP Fast is both moisture tolerant and resistant to elevated pH levels. It is not designed to be a moisture vapor barrier.
TXP Fast Primer is for use on floors with a Moisture Vapor Emission Rate up to 20 lbs, RH of 100% and pH up to 14. Comply with subsequent manufacturer’s testing and installation requirements when using their products are conjunction with TRU Self Leveling as part of a floor system installation.
Features & Benefits
- Superior broadcast sand suspension properties
- Ready for overlayment in 4-6 hours
- Low viscosity, deep penetrating
- 100% solids, low odor, no VOC
- Excellent adhesion to concrete
- Seals concrete, minimizes pinholes in overlayment
Coverage is 400 ft2 to 480 ft2 (37 m2 to 42 m2) at 12 mils to 10 mils (0.4 mm to 0.3 mm) thickness. These rates are approximate and vary due to the porosity and surface profile of the concrete substrate.
TXP FAST is available in 3-gallon kits